Welcome!

Funduino Mega 2560 Module

Be the first to review this product

SKU MB0003
Weight 0.06 / KG(Kilogram)

Availability: In stock

$14.40
$14.40

We Accept Paypal,Western Union

We'll send product in 2 days.

Write Product Review to earn points and Money!

Description

Details

 Funduino Mega 2560 Overview(100% Compatible for Ardui no):

 
The Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital
 
input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Duemilanove or Diecimila.
 
The Mega 2560 is an update to the Mega, which it replaces.
 
The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
 
Revision 3 of the board has the following new features:
 
1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
Stronger RESET circuit.
Atmega 16U2 replace the 8U2.
 
 
 
Mega 2560 Power:
 
The Mega can be powered via the USB connection or with an external power supply. The power source is selected automatically.
 
External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.
 
The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.
 
The power pins are as follows:
 
VIN. The input voltage to the board when it's using an external power source (as opposed to 5 volts from the USB connection or other regulated power source). You can supply voltage through this pin, or, if supplying voltage via the power jack, access it through this pin.
5V. This pin outputs a regulated 5V from the regulator on the board. The board can be supplied with power either from the DC power jack (7 - 12V), the USB connector (5V), or the VIN pin of the board (7-12V). Supplying voltage via the 5V or 3.3V pins bypasses the regulator, and can damage your board. We don't advise it.
3V3. A 3.3 volt supply generated by the on-board regulator. Maximum current draw is 50 mA.
GND. Ground pins.
IOREF. This pin on the board provides the voltage reference with which the microcontroller operates. A properly configured shield can read the IOREF pin voltage and select the appropriate power source or enable voltage translators on the outputs for working with the 5V or 3.3V.
 
Specification: 
 
Microcontroller ATmega2560
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz

Additional Info

Additional Info

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Payment Shipping

Loading....

1.Payment Method

We offer flexible payment methods for customers to choose: PayPal (Credit Card is acceptable), Western Union, and T/T.
Through PayPal, you can pay with credit card, debit card, or bank account balance.
Once your order is submitted, you will be redirected to PayPal's site where you could make the payment.

2.Shipping Details

- Item Processing Time:
All orders will be shipped out within 3 days and the normal processing time is 48 hours, subject to availability of the stock.

- Shipping Ways:
We offers 2 shipping Express services and 2 Airmail for customers to choose: DHL, Hongkong EMS.

Hongkong Registered Airmail
Singapore Registered Airmail
Combined shipping cost for each order is fixed.

- Order Tracking:

There are two ways to track your package. After you've placed your order you should receive in one to two business days another email with a tracking number as well as the tracking website. When you track in the website with the tracking number, you can see all your order's shipping information displayed. Please Note: if you just received your tracking number that you may not be able to track your package until the following business day.
You can also log in to your Account to check your order status, and all information is displayed including detailed shipping information. Please Note: if at any time you are concerned about your package, don't hesitate to contact us. We'd rather find out about issues sooner than later. Email us: sales@capteli.com

Shipping Carrier ETA(Estimated Time of Arrival)
Hongkong EMS Express 7 - 10 Working Days
DHL Express 7 - 10 Working Days
Singapore Registered Airmail 7 - 30 Working Days
Hongkong Registered Airmail 7 - 30 Working Days

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in

Reviews

Tell us what you think about this item!